FRONT DOOR PANELS

You can pick one of the KOMPOtherm® front door panels straight away or browse through the over 1,000 variations. Our KOMPOtherm® panels come in virtually innumerable designs. The various styles with rounded arches, segmented arches, angled corners or individual shapes leave practically no wish unfulfilled. The matching side part is available or can be fitted for each panel model.

Decorative frames

The KOMPOtherm® decorative frame is a delightful design element. It is made of solid aluminium and is always fitted on the inside and outside to ensure a harmonious look. Customers can choose between three decorative frames. The CLASSICline model is fitted as the standard frame. But you can also select the PLUSline or BLOCKline models. 3 mm aluminium cartridges are mounted on the front and the back as the sandwich casings.

Sandwich elements

Keep the cold out, where it belongs. KOMPOtherm® front door panels make sure that you don’t waste energy. Cold stays outside, while the insides stay warm and snug thanks to the insulating cores. The sandwich elements are fitted with 1.5 mm and 3 mm aluminium plates on the inside and outside respectively, while the insulating core is responsible for drainage.

Glass replacement

A patent recipe for great design, or in other words a patented and protected idea. Should you ever need to replace the glass on the panel of your KOMPOtherm® front door, whatever the reason, it will only take a few minutes. Without damaging the frame or the panel. That’s what we call perfection – down to the very last detail.
(German patent no.: 3936400) (European patent no.: 0425788)

DECORATIVE FRAMES

CLASSICline
The front door panels are fitted with the CLASSICline decorative frame as a standard feature.

PLUSline
Elegant and decorative frame with round edges.

BLOCKline
Linear, angular, with striking corner bevel. (Only available for square and rectangular frame shapes without sash bars)

SANDWICH ELEMENTS

Standard panel thickness 40 mm. Overlapping 40 mm on the outside (surcharge) 

Thermal insulation panel, thickness 60 mm  overlapping on both sides

Inside and outside overlap, thickness up to 109 mm

GLASS REPLACEMENT FOR E-DESIGN PANELS

Whenever it is technically possible, the inside panel of all KOMPOtherm® E-design front doors is equipped with the combined frame for convenient glass replacement. This means the sleek E-design look on the outside and the matching combined frame in PLUSline style on the inside.

Only available for the KOtherm series.
A surcharge applies.

Interior view of the KOtherm 96 profile system with concealed hinges

Exterior view

 

Your contact at KOMPOtherm®

 

We will gladly assist if you have questions about our front doors, catalogues or your closest dealership: call +49 (0)52 46 / 704 - 0 or email us at kontakt(at)kompotherm.de.